|
|
EUROPICCOLA EN – 1967 (serial number
A3670) |
KEY FEATURES
The machine was produced in 1967 (estimated
based on the number of series) and
recorded with serial number A3670, corresponding to the progressive 13670
Represents the second important
change of the Europiccola, with the introduction of the drip tray.
Other special features include:
• Grid aluminum with square
holes
• Support higher of sight glass
level without stopper cap
• logo red in metal fixed to
the base with two pins
Models with these
characteristics was produced in the period from 1964 to 1967.
is rather complicated
disassemble these machines because they need special tools, in particular is very
difficult to replace the seals, because the brass sleeve is screwed directly on
the group and can be removed only with a special key. Often even the service
centers are not able to do this. In addition, the seals of the sleeve, the
shower plate gasket and the cap boiler seal are out of production.
|
DETAILS |
||
|
|
|
|
|
Cap
boiler screwes outside of the boiler |
Group
screwed on the boiler |
Safety valve |
|
|
|
|
|
Steam tap |
Steam pipe |
Protection
of the sight glass in metal |
|
|
|
|
|
Piston and sleeve in
brass, gaskets |
The leverage is coming
down towards the end with the holes, the lever pins are longer than the
current and are fixed with smaller rings, handle of bakelite |
Base in aluminium |
|
|
|
|
|
Heating element with four prongs and screwed on the boiler |
The switch in position "massimo"
turn the two filaments of resistance, in a "minimo" only a filament |
Switch |
|
|
|
|
|
Power cable |
Drip
tray and aluminium grid |
Logo
sticker red, in metal, fixed to the base with two pins |
|
|
|
|
|
Rubber
sub-base with 3 holes |
Grid in aluminium |
The holder filter is particularly deep and
the jet has the circular exit holes |
|
|
||
|
Filter baskets |
||
(sent
to Lucio – Italy)
|
© 2008 Francesco
Ceccarelli. All rights reserved. |