fc-world.gif

 

Co-Fer - February 1962

 

CIMG3792.JPG   CIMG3794.JPG

KEY FEATURES

   The machine was produced by Co-Fer Milano in February 1962 (engraved on the heating element) and has not serial number.

CIMG3785.JPG

It almost identical to the first model Europiccola, marketed by La Pavoni starting in 1961 and characterized by the absence of the glass water level indicator.

Machines with Co-Fer mark. were produced only in the period 1958-1962. There is a variant called Caferina.

CIMG3773-bis.JPG    caf2.jpg

Differs from Europiccola for the following features:

·          Absence of the serial number engraved on the group

·          switch with a blue background instead of red

·          switch different type

·          logo adhesive oval with written Cream Coffee – Co-Fer - Milan

CIMG1939.JPG

 

DETAILS

CIMG3776.JPG

CIMG3796.JPG

CIMG1373.JPG

The cap is made of metal and screws outside the boiler

The body group is screwed directly on the boiler, manca l’indicatore di livello dell’acqua

The safety valve is composed of a spring and a ball of metal

CIMG3780.JPG

CIMG1363.JPG

CIMG3789.JPG

The steam tap knob is screwed to shaft and stopped by a screw

the end of the steam pipe is small and rounded

The leverage is coming down towards the end with the holes, the pins are leveraging slightly longer of 2 mm than the current and smaller rings

CIMG3169.JPG

CIMG3783.JPG

CIMG3170.JPG

The piston brass has three small holes on the bottom

Inside the group is a straitjacket that brass is to shower where water comes out, is screwed in the group and a gasket seals top and bottom (sottocoppa) upon which the holder

The straitjacket and seals

CIMG3784.JPG

CIMG3775.JPG

CIMG3804.JPG

The base is in aluminum case, the resistance is a double-filament, copper, screwed directly on the boiler

The switch in position "massimo" turn the two filaments of element, in a "minimo" only a filament. The color is blue

Switch

CIMG3777.JPG

CIMG3787.JPG

CIMG3788.JPG

Heating element and pipe

The holder is particularly deep and the jet has the circular exit holes

The filter 2 doses is deeper current filters

CIMG3773.JPG

CIMG3782.JPG

CIMG3786.JPG

The logo is gold in aluminum foil

The plan to support the cup is slightly shaped and not has the function to collect the drops, the paint is green and hammered type

sottobase is in blue rubber and hangs on aluminum base

 

 

© 2009 Francesco Ceccarelli. All rights reserved.
Reproduction in any form without permission is prohibited

 www.francescoceccarelli.eu