|
|
FAEMA
BABY 70s (brand embossed) |
The machine was produced by Faema in 70s.
Hasn't serial number and is characterized
by aluminum handles and the brand embossed and not adhesive as previous model.
Technical specification:
· dimensions
30/50 cm x 18 cm x 15 cm
· weight
1,27 kg
The machine
has piston actuated by a couple of levers. Pushing the two levers to the
bottom, the piston descends in the filter, previously filled with boiling
water, and pushes the hot water through the shower plate.
Can be
disassembled by unscrewing the two screws that hold the body that houses the
piston and lever.
To make the
coffee I followed the following steps: I filled the tank in mid-water and
inserted the plug. After about 10 minutes the water began to boil. I removed
the plug, put the coffee in the filter and pressed with the tamper. I then
inserted the holder filter, pushed the levers down, waiting a few seconds and
then I slowly released the levers.
Definitely is original the idea
of a system that makes coffee without a power supply, and with heating the
water separately.
Can be
disassembled by removing the clip on the rear of the bolt that fixes the levers
on the body machine.
|
DETAILS |
||
|
|
|
|
|
Bolt
for fixing the levers |
Aluminum levers |
Piston, gasket and bolt |
|
|
|
|
|
Filter basket and tamper |
Holder filter |
piston gasket |
|
|
|
|
|
Body machine |
Sub-base with rubber foot |
|
|
(sent to Francois – France) |
||
|
© 2009
Francesco Ceccarelli. All rights reserved. |