Technical specification:
capacity voltage power dimensions (HxWxD) weight	1,0 l 220V 200 W + 800 W 40/46 cm x 18 cm x 30 cm 11 kg

The machine can be dismounted but it takes some special tools

In particular, the major obstacle is the removal of the brass sleeve, which is necessary in order to remove the piston.

you must use a wrench with two pins that fit into the two holes of the sleeve

after removing the sleeve, you can unscrew the small disk that holds the base of the piston

if you want to remove even the piston, must compress the spring upwards, to remove the pin that locks the shaft

to compress the spring I used an old car jack, with a thickness of metal to push the piston upwards

after removing the pin, the car jack can be lowered to release the piston with the spring

Finally, be unscrewed with a pipe wrench 26, the nut that locks the shaft piston seal

and finally here are all the parts of the group, after cleaning, with the gaskets on the side

the wiring diagram has not particularity

DETAILS
cap boiler with steam tap and safety valve	heating elements	sight glass
knock box	grid and drip tray	filters basket